Masterdrives MC DC/AC Drive Siemens 6SE7014-0TP50-Z

Siemens SIMOVERT MASTERDRIVES DC Frequency Converter (6SE7014-0TP50-Z)

Core Specifications

Electrical Characteristics

• DC Link Voltage: 510-650V DC
• Control Method: Vector Control
• Overload Capacity: 150% for 60s
• Braking: Dynamic braking optional
• Switching Frequency: 4-16 kHz adjustable

Environmental Ratings

• Operating Temp: -10°C to +45°C
• Storage Temp: -25°C to +70°C
• Humidity: <95% non-condensing
• Altitude: <1000m without derating

Alternative Models Comparison

Installation Notes

• Mount vertically with top/bottom clearance >10cm
• Use copper conductors only (min 2.5mm²)
• Ground resistance <0.1 Ω required
• EMC filter must be installed near unit

Maintenance Procedures

• Check DC capacitor health annually
• Clean air vents every 6 months
• Verify torque on power terminals yearly
• Monitor heat sink temperature regularly

Frequently Asked Questions

Q: Can this drive operate on single-phase power?
A: No, requires 3-phase input power only

Q: What braking options are available?
A: Supports resistor braking (requires external unit)

Q: Is encoder feedback supported?
A: Yes, through optional encoder module

Q: Can I parallel multiple units?
A: Not recommended – use higher power model instead