IC695CNM001 PACSystems RX3i CANopen Master Module
Easy Device Control
This CANopen master module from Emerson Automation (formerly GE Fanuc) connects RX3i systems to industrial networks. Controls up to 5 slave devices with real-time data exchange.
Key Technical Specs
| Brand/Model | Emerson IC695CNM001 |
| Slave Devices | 5 maximum |
| Data Speed | 10 kbit/s to 1 Mbit/s |
| Power Use | 800mA @ 3.3VDC |
| Data Capacity | 272 bytes PDO scanning |
| Hot-Swap | Yes – install while powered |
| Operating Temp | 0°C to 60°C |
Simple Setup
Install in any main rack slot (except Slot 0). Configure with SYCON.NET software via USB Mini-B port. Status LEDs show network health instantly.
Works With
- PACSystems RX3i controllers
- Devices using CANopen protocol
- Requires firmware v7.70 or newer
What You Receive
- IC695CNM001 module
- Installation guide
- 12-month warranty
Fast Global Shipping
Choose FedEx, UPS or DHL. Tracking included.
Factory Success Story
Food packaging line connected 5 filling machines to one RX3i controller using this module. Reduced wiring by 70% and improved speed monitoring.
Common Questions
Q: What connectors does it have?
A: USB Mini-B + 9-pin D-sub male
Q: Can I monitor device health?
A: Yes – supports heartbeat protocol and node guarding
Q: Maximum cable length?
A: 40 meters at 1 Mbit/s speed
%20connects%20RX3i%20systems%20to%20industrial%20networks.%20Controls%20up%20to%205%20slave%20devices%20with%20real-time%20data%20exchange.%20Key%20Technical%20Specs%20Brand/Model%20Emerson%20IC695CNM001%20Slave%20Devices%205%20maximum%20Data%20Speed%2010%20kbit/s%20to%201%20Mbit/s%20Power%20Use%20800mA%20%5B…%5D&media=https://worldofplc.com/wp-content/uploads/2025/06/IC695CNM001.webp){kind=link}
Reviews
There are no reviews yet.